Multi-Grip Rivets • Plated Steel Mandrel • IFI Grade 30

 

Steel Buttonhead

 

 
          Grip Range Typical Ultimate
AFS Rivet Dia.
Nom. Inch		 Drill No. & Hole Size Head Dia.
Nom Inch		 Head Height 
Max Inch		 Rivet Length
Max		 Strength (Lbs.)
(newtons)
Part No. (mm) (mm) (mm) (mm) Inch (mm) Inch (mm)  Shear  Tensile
SB41-42MG 1/8"(.125) #30(.129-.133) .283 .033 .355 9 .043-.156 1.1-4.0 340 385
  3.2 3.3(3.28-3.38) 7.2 0.85         1510 1710
SB52-53MG 5/32”(.156) #20(.160-.164) .319 .047 .433 11 .056-.196 1.4-5.0 440 530
  4 4.1(4.06-4.16) 8.1 1.20         1960 2360
SB62-63MG 3/16"(.187) #11(.192-.196) .386 .069 .405 10.3 .047-.187 1.2-4.8 810 750
  4.8 4.9(4.88-4.98) 9.8 1.75         3605 3335
SB63-64MG         .500 12.7 .156-.250 4.0-6.3 1025 780
                  4560 3470

 

 

Aluminum/Steel Buttonhead†

 

Typical Ultimate
Rivet Dia. Drill No. & Head Dia. Head Height  Rivet Length Grip Range Strength (Lbs.)
AFS Nom. Inch Hole Size Nom Inch Max Inch Max (newtons)
Part No. (mm) (mm) (mm) (mm) Inch (mm) Inch (mm)  Shear  Tensile
AB41-43MG 1/8"(.125) #30(.129-.133) .250 .037 .315 8.0 .031-.187 0.8-4.8 165 230
AB42-44MG 3.2 3.3(3.28-3.38) 6.35 .95 .375 9.5 .046-.250 1.2-6.4 735 1025
AB44-45MG         .438 11.1 .156-.312 4.0-7.9    
AB45-46MG         .500 12.7 .216-.375 5.5-9.5    
AB52-54MG 5/32"(.156) #20(.160-.164) .312 .047 .375 9.5 .046-.250 1.2-6.4 255 375
AB54-56MG 4 4.1(4.06-4.16) 7.92 1.20 .500 12.7 .156-.375 4.0-9.5 1135 1670
AB56-58MG         .666 16.9 .250-.500 6.4-12.7    
AB62-64MG 3/16"(.187) #11(.192-.196) .386 .057 .406 10.3 .062-.250 1.6-6.4 350 530
AB63-67MG 4.8 4.9(4.88-4.98) 9.8 1.45 .595 15.1 .187-.437 4.8-11.1 1560 2360
AB66-68MG         .666 16.9 .250-.500 6.4-12.7    
AB610-612MG         .978 24.8 .500-.781 12.7-19.8    

† Mandrel–Zinc with Yellow Dichromate Finish

 

 

Aluminum/Steel Large Flange

 

Typical Ultimate
Rivet Dia. Drill No. & Head Dia. Head Height  Rivet Length Grip Range Strength (Lbs.)
AFS Nom. Inch Hole Size Nom Inch Max Inch Max (newtons)
Part No. (mm) (mm) (mm) (mm) Inch (mm) Inch (mm)  Shear  Tensile
ABL42-43MG 1/8"(.125) #30(.129-.133) 0.325 0.039 0.315 8 .031-.187 0.8-4.8 165 230
ABL42-44MG 3.2 3.3(3.28-3.38) 8.25 1 0.375 9.5 .046-.250 1.2-6.4 735 1025
ABL44-45MG         0.438 11.1 .156-.312 4.0-7.9    
ABL52-54MG 5/32"(.156) #20(.160-.164) 0.374 0.051 0.375 9.5 .062-.250 1.6-6.4 255 375
ABL53-55MG 4 4.1(4.06-4.16) 9.5 1.3 0.438 11.1 .125-.312 3.2-7.9 1135 1670
ABL55-58MG         0.69 17.5 .251-.500 6.4-12.7    
ABL62-64MG 3/16"(.187) #11(.192-.196) 0.625 0.069 0.406 10.3 .062-.250 1.6-6.4 350 530
ABL66-68MG 4.8 4.9(4.88-4.98) 15.85 1.75 0.666 16.9 .250-.500 6.4-12.7 1560 2360
ABL610-612MG         0.978 24.8 .500-.781 12.7-19.8    

 

 

Aluminum/Steel 120º Countersunk

 

Typical Ultimate
Rivet Dia. Drill No. & Head Dia. Head Height  Rivet Length Grip Range Strength (Lbs.)
AFS Nom. Inch Hole Size Nom Inch Max Inch Max (newtons)
Part No. (mm) (mm) (mm) (mm) Inch (mm) Inch (mm)  Shear  Tensile
AC43-44MG 1/8"(.125) #30(.129-.133) 0.209 0.029 .383‡ 9.7 .093-.250 2.4-6.4 155 206
    3.2 3.3(3.28-3.38) 5.3 0.75       690 912
AC53-55MG 5/32"(.156) #20(.160-.164) 0.252 0.049 .470‡ 11.9 .109-.312 2.7-7.9 255 300
  4 4.1(4.06-4.16) 6.4 1.24         1135 1670
AC62-65MG 3/16"(.187) #11(.192-.196) 0.345 0.051 .500‡ 12.7 .062-.312 1.6-7.9 350 530
AC66-68MG 4.8 4.9(4.88-4.98) 8.75 1.3 .690‡ 17.5 .250-.500 6.4-12.7 1560 2360

‡ C.S.K.–Total Length (L) including head 

 

Multi-grip rivets provide an effective and economical alternative to other, more costly methods of fastening, because one size handles the grip range capacity of up to 3 standard open end rivets. Multi-grip rivets can be used in any application requiring open end rivets, while reducing inventory requirements. Use multi-grip rivets as a standard open-end rivet... no special tool is needed.